USDMX

The strobe needs:

15 Amps in 110 V system
10 Amps in 230 V system
Ch1 is the FLASHRATE from 0/2 Hy to 17 Hz
Ch2 is the BRIGHTNESS from 0% to 100%

High-Intensity Flash Tube

CAUTION!
LIGHT FLASHES OF VERY HIGH INTENSITY! 2500 WATTS!

To achieve ultra-high intensity at 110 V, we had to design a revolutionary tube. For comparison purposes, our surveys indicate that a normal XOP15-compatible tube would not working on this voltage system. We’ve even developed a new holder system to eliminate shipping damage to these high-performance tubes, which means a flexible lead-wire with copper lace.

Considerable durability

The circuits were designed with extra durability in mind. As a matter of fact, it is difficult to damage them under normal conditions. Past experience of TURBO strobes indicates that the average lifetime of our products is more than 6 years. The 3 indicator LED helps your work:

USDMX is just a bit smaller than EURODMX.

Control system

It a can be controlled by those potmeters and DMX 512 controller.
The unit has 2 DMX channels.

Ch1 is the FLASHRATE from 0/2 Hz to 17 Hz
Ch2 is the BRIGHTNESS from 0% to 100%