CapStrobe 35J

Description

CAP Strobe 35J

The operation of CapStrobe is based on a special stroboscope technology. During its operation, all flashes are made from an energy storage, capacitor. Consequently, the flash time (duration) is incredibly brief. similar to how the flash photography industry uses it. Despite this, the mains voltage—rather than the widely used DC batteries—is used to recharge the empty tanks here. However, the amount of power extracted from the network is negligible. About half of comparable LED products are. Simultaneously, there is an exceptionally high flash energy happens during the discharges. The maximum energy flash can be seen for roughly 40 kilometers.

At their peak flash energy, they repeat rate two to three seconds. At the same time, there may be two or three minimum energy flashes per second. This small energy is also visible at a distance of 10 km.

The device’s design means that it won’t need maintenance for many years. The military grade permits the same choice of capacitors, and the flash tube is oversized and not anticipated to reach the end of its life.

There is also high voltage protection on the input.

The polycarbonate housing’s side permits the use of Cable-Glands, and connectors are based on customer specifications prior to manufacturing.

Because of its versatility, the CapStrobe can be a useful tool for permanent installations on tall buildings or rental homes.
See more videos on HungaroFLASH CapStrobe35J